Cladding shop drawings

ACM and MCM panel shop drawings

Panel layouts, returns and interface details for aluminium and metal composite facades.

Request a shop-drawing quote

  • Panel IDs & returns
  • Coordinated schedule
  • Interfaces & holds

Canada-wide remote drafting; US enquiries welcome. Installation coverage is separate. Engineering design and professional sealing are separate services. Scope, timing and price are confirmed in the quotation.

ILLUSTRATIVE REFERENCE4 CHAPTERS
W1W28 450 mm · reference bay16 panels2 openings
Establish the elevation.

Use the reference bay to see panel zones, joints and openings together before coordinating individual panels.

P-A2Type T2 · sample face1 800 mm900 mm
Separate the face from the returns.

The sample face is dimensioned; dashed returns are conceptual. Fold radii, allowances and machine files are not implied.

Panel edgeHF-1 · headFrame by othersSF-1 · sillD1 · schematic reference only
Locate the adjacent interfaces.

Coordinate panels with the opening and flashing references. Project details govern the actual support and attachment system.

Matched panel scheduleS0
Authored reference schedule; not for fabrication
TypeFace size · mmQty.
T11,200 × 9004
T21,800 × 9002
T31,200 × 1,5004
T41,200 × 8004
T51,800 × 8002

16 panel IDs · five scheduled types

Reconcile IDs, sizes and quantities.

A coordinated schedule follows the drawing. Fabrication outputs require a separately agreed and reviewed scope.

Read all four steps
  1. Establish the elevation. Use the reference bay to see panel zones, joints and openings together before coordinating individual panels.
  2. Separate the face from the returns. The sample face is dimensioned; dashed returns are conceptual. Fold radii, allowances and machine files are not implied.
  3. Locate the adjacent interfaces. Coordinate panels with the opening and flashing references. Project details govern the actual support and attachment system.
  4. Reconcile IDs, sizes and quantities. A coordinated schedule follows the drawing. Fabrication outputs require a separately agreed and reviewed scope.

Authored S0 sample · not for fabrication. Project sources and required technical reviews govern.

Coordination drawings and fabrication outputs are different deliverables

Composite panel work usually needs two kinds of drawing, and it helps to be clear which one you are asking for.

  • Coordination shop drawings show the panel layout, joints, returns, openings, interfaces with other trades and the details the consultant reviews. This is FPG’s core shop-drawing service.
  • Fabrication outputs, such as flat patterns, routing and folding information, cut lists or files for a fabricator’s machines, depend on the fabricator’s equipment and the approved system. They are quoted separately, and only when the scope and the fabricator’s requirements are defined.

Coordination drawings under review are not fabrication-ready. Fabrication starts after the required reviews and the fabricator’s own checks.

What the coordination drawings cover

  • Elevations with panel IDs, module sizes and joint widths, dimensioned to the governing drawings.
  • Corner, return and soffit conditions, including how the panel faces meet at outside and inside corners.
  • Head, jamb and sill details at openings, and the flashing interfaces at each.
  • Parapet, base and transitions to other cladding or glazing systems.
  • Panel and flashing schedules that match the elevations.
  • Attachment and support coordination shown as the specified system and the approved engineering require.

How a schedule ties back to the layout

Every panel ID on the elevations appears once in the schedule, and each flashing profile in a detail appears in the flashing schedule with its girth, length and quantity. This illustrative sample shows the format.

See what you receive

Authored illustrative sample. It shows how a panel layout, its schedule and a coordinated opening detail are presented and cross-referenced. It is not a project drawing, is not taken from any client project, and is not for fabrication. Your project's specified system, verified dimensions and approved engineering govern.

Sheet SAMPLE-A2 — panel schedule matching SAMPLE-A1 (16 panels)
TypeSize W × H (mm)QtyPanel IDs
T11200 × 9004P-A1, P-A3, P-A4, P-A6
T21800 × 9002P-A2, P-A5
T31200 × 15004P-B1, P-B3, P-B4, P-B6
T41200 × 8004P-C1, P-C3, P-C4, P-C6
T51800 × 8002P-C2, P-C5
Flashing schedule — profiles referenced by detail D1
ProfileOpeningGirth (mm)Length (mm)QtyDescription
HF-1W118519001Head flashing with end dams
HF-1W218519001Head flashing with end dams
SF-1W121019001Sill flashing with end dams
SF-1W221019001Sill flashing with end dams
JT-1W112015002Jamb trim
JT-1W212015002Jamb trim

What we need from you

  • Current architectural drawings and the cladding specification section, with revision dates.
  • The specified panel and attachment system, and the fabricator if one has been chosen.
  • Engineering requirements for the support and attachment system, where the project has them.
  • Window, curtain wall or storefront shop drawings that the panels must meet.
  • Any review comments already received.

The ACM and rainscreen coordination guide explains the common interface questions, and the submission checklist covers the documents to gather.

Questions about ACM and MCM drawings

Questions about ACM and MCM drawings

Can you prepare files for our fabricator’s routing machine?

Only as a separately defined scope, after the coordination drawings and the fabricator’s requirements are settled. Say so in your enquiry and include the fabricator’s file requirements.

Do you check the panel system’s structural capacity?

No. Structural design, fastener capacity and any professional seal belong to the project’s engineer. The drawings show the approved requirements. They do not replace them.

Do you work on projects outside British Columbia?

Yes. Shop drawings are prepared remotely for projects across Canada, and enquiries from the United States are welcome. Scope, units and responsible professionals are confirmed for each assignment.

Request a shop-drawing quote

Tell us about the project. You don't need to send drawings yet. If your document set is ready, use the secure upload form instead.

Contact

Project

City and province or state, for example Calgary, AB or Seattle, WA.

What do you need? (optional)

Elevations or areas involved, deliverables you expect, review comments you have received, and who the engineer or fabricator is.

Sending this enquiry does not create an account and does not confirm a price, a delivery date or acceptance of any drawings. Engineering and professional sealing are not part of a drafting quotation.